b'TekStik TekStikEPDM Contact Adhesive Foaming Insulation AdhesiveDescription: Description:TekStik EPDM Roofing Contact Adhesive NCTekStik Foaming Insulation Adhesive is a one part, is a sprayable contact adhesive specificallyself-contained, sprayable, foaming polyurethane adhesive designed for the bonding on EPDM to a varietyspecifically designed for bonding a wide range of insulation of substrates. Due to the self-contained,materials including XPS, EPS, PUR, PIR, foil faced, tissue faced pressurised system, EPDM Roofing Contactand mineral wood to a variety of different substrates such Adhesive NC offers a quicker and cleaneras OSB, Plywood and concrete. TekStik Foaming Insulation alternative to traditional pour out and roll onAdhesive is designed to quickly and precisely deliver a bead contact adhesive. of polyurethane foam, drastically reducing the time taken to install insulation. This typically halving the cure time taken from traditional poured single component polyurethane products. Using a TekStik extension gun and braided hose allows the Foaming Insulation Adhesive to be applied without requiring operatives to continually bend down during installation.PACK SIZEAVAILABLE:PACK SIZE22 AVAILABLE:Ltr 22LtrTECHNICAL SPECIFICATIONSSolvent Hydrocarbon, Acetone, Methyl Acetate, ToluenePropellant Hydrocarbon TECHNICAL SPECIFICATIONSSolids Content (approx) 35%Spray Pattern Web Base PolyurethaneColour Green Application Temp 5 0 C - 30 0 CCoverage (approx) 22L 115m 2 Spray Pattern Foaming BeadCoverage (approx) 14L 70m 2 Colour Straw likeVOC 539g/l Coverage (approx) 22L 350m 2Coverage (approx) 14L 210m 2Storage and Shelf Life:Protect from extremes of temperature in aStorage and Shelf Life: controlled environment between 15 C and 35 CProtect from extremes of temperature in a controlled and away from direct sunlight. Do not stand on aenvironment between 15 C and 35 C and away fromcold concrete floor. Low temperatures can resultdirect sunlight. Do not stand on a cold concrete floor. in irreparable separation of the adhesive. If theLow temperatures can result in irreparable separation of product sprays like a jet, the canister is too cold.the adhesive. If the product sprays like a jet, the canister Warm to at least 10before using. DO NOT ALLOWis too cold. Warm to at least 10before using. DO NOTTHE PRODUCT TO FREEZE. Stored under theALLOW THE PRODUCT TO FREEZE. Stored under the correct conditions, in original unopened containers,correct conditions, in original unopened containers, the the product will have a shelf life of 12 months. product will have a shelf life of 12 months.'