b'Tek-Kote RangeA range of Semi Permanent, SiliconeTEK-KOTEfree Release Agents for mould preparation, release and care. Available in 1Ltr and 5Ltr pack sizes.KOVERTEK DESCRIPTION VE & PE RESINS EPOXY RESINSTEK-KOTE Gel Coat Non-Gel Coat RTM/Infusion PrepregTek-KoteWipe on Leave On or Resi-Release Spray On release agent 3 3 3Tek-KoteHigh gloss wipe on only Fast-Release release agent3 3Tek-KoteHigh gloss wipe on only Fast-Release-XPRE release agent 3Tek-KoteHigh gloss fast dry Spray-Release Gloss sprayable release agent 3 3Tek-Kote Mould Cleaner NOTE: All mould surfaces should be cleaned using Tek-Kote Mould Cleaner. New Moulds should be cleaned with Mould Cleaner and treated with 2 coats of Mould Sealer before adding 4 coats of the Tek-Kote Mould Sealer relevant sealer. Never use cotton rags, always use Kovertek Dry Roll Wipes. When release agent has been opened, replace the lid straight away after use.EPOX-B Higher solids for use on Epoxy or mould B-faces 3 3 321'