b'n StorageGELCOATn Catalystn PlanningUSER GUIDEn Preparationn Applicationn Temperaturen FinishingTaking Delivery:-When a delivery arrives, check the order details /CHECKLISTshipping advice for:3nPacking condition3ALWAYS STOREnCorrect quantityCATALYST IN A DRY3nProduct Type &LOCATION AWAY FROMColourGELCOATS , RESINS &3CONTAMINANT RISKS nSpray/Brush3nBatch numberStoring Your Gelcoat:- n Keep in a separate storage room and out of direct sunlightn Keep stock in original cans and drums with lidsand caps tightly closedn Pay attention to product shelflife and exerciseregular stock rotationn Store below 20C.If storage is cold (eg outside shed),then product needs to be acclimatised to an ambienttemperature (18 - 23C) before usePreparing Your Mould:- n Clean the mould properly with Tek-Kote mould cleaner toremove any debris, dust or loose contaminantsn Apply Tek-Kote release agent to the surface of theclean mould, following the instructions carefullyn For a new mould, ensure that the surface is sealed withTek-Kote mould sealer prior to application of thechosen release agent and apply release agent 5 times withan hour between each coat.n Keep area used for gelcoating dust free, clean and free from air born contamination such as debris from yourfinishing area.n Wear suitable PPE22'