b'High Performance Isophthalic Gelcoats(For Good Weathering & Mechanicals)Based on Isophthalic resin to use for quality applications. Easy to Brush & spray, do not drain on inclined surfaces.Good handling and coverage. No porosity. Fast drying.Good mechanical and impact resistance. Excellent resistance to hydrolysis. Certain grades suitable for food contact. BRUSH KEY TECHNICAL FEATURES: -Application Gel Time (ICON 002) ( 2% MEKP on 100gr) 10-14 minutes Brookfield Viscosity (ISO2555 - 20Csp6) 5 rpm : 230 - 420 Poise GC 610Mechanical Properties of cured gel coatElongation at break 4.1 %Isophthalic Lloyds ApprovedHeat distortion temperature (HDT) 75 C Marine Grade Barcol hardness 50Gelcoat TOP COAT 610, with wax Topcoat version addition for tack free finishPre-AcceleratedMarket leading high quality Lloyds approved brush-able Gelcoat with excellent coverage, handling, hide and with superior gloss. Suitable for all demanding applications including marine where weathering performance is important. If you are brushing you will love this gel! In pack sizes 5kg, 20kg, 25kg and 225kgSPRAY KEY TECHNICAL FEATURES: -Application Gel Time (ICON 002)10 min(23C2% MEKP on 100gr)Brookfield Viscosity (ISO2555 - 23Csp5) 5 rpm : 140 - 220 Poise GC 188 Mechanical Properties of cured gel coat Isophthalic Elongation at break 1.8% Gelcoat Temperature of deflection under load* (HDT)74C Pre-Accelerated (ISO 75-3) BRUSH VERSIONGEL COAT 181 SV-15TOP COAT VERSION TOP COAT 188 (with wax addition for tack free finish)Certificates Antifungal EN ISO 846-AGC188 is a gel coat based on Isophthalic resin to use for quality applications.For spray application. GC188 is easy to spray and does not drain on inclined surfaces. Good handling and coverage. No porosity. Fast drying.Good mechanical and impact resistance. Excellent resistance to hydrolysis. 8'