b'General Purpose/Industrial GelcoatsVery popular general purpose / industrial grade gel coat suitable for most applications. Available in any RAL or BS shade in packs of 5kg, 20kg, 25kg, 225kgBRUSH KEY TECHNICAL FEATURES: -Application Brookfield viscosity (ISO 2555 - 23C - sp6) 300 - 340 PoiseGel time (ICON 002) 23C - 2% MEKP on 100g 13-17 minsMechanical Properties of cured gel coatGC 181 SV-I5 Elongation at break - ISO 527 1.7%Isophthalic quality Temperature of deflection under load - HDT- ISO 75-266CBarcol Hardness40-45A very popular general purpose / industrial grade gel coat suitable for most applications. Available in any RAL or BS shade in packs of 5kg, 20kg, 25kg, 225kg. NOTE: All NORD Gelcoats are fully isophthalic as a minimum quality.SPRAY KEY TECHNICAL FEATURES: -Application Gel Time (ICON 002)10 min(23C2% MEKP on 100gr)Brookfield Viscosity (ISO2555 - 23Csp5) 5 rpm : 140 - 220 Poise GC 188 Mechanical Properties of cured gel coat Elongation at break 1.8% Isophthalic Gelcoat Temperature of deflection under load* (HDT) Pre-Accelerated (ISO 75-3)74C BRUSH VERSIONGEL COAT 181 SV-15TOP COAT VERSION TOP COAT 188 (with wax addition for tack free finish)Certificates Antifungal EN ISO 846-AGC188 is a gel coat based on Isophthalic resin to use for quality applications.For spray application. GC188 is easy to spray and does not drain on inclined surfaces. Good handling and coverage. No porosity. Fast drying.Good mechanical and impact resistance.6'